SOFTWARE TO DOWNLOAD : opbx x5 rs 232 files
Recovery Guide Boot This loader supports
updating via the RS232 port, even if broken bootloader.
1. Make sure that the
receiver is disconnected from the power supply (via the switch on the rear
panel) and connected to a computer via an RS232 port.
2. Download the boot
loader and the latest software
3. Unpack the archive UARTLOADER.zip at any place
4. Change the name of
the software on rom.bin and place
the file in the unzipped folder UARTLOADER, where file ConsoleDown v1.3.3.11.exe
5. Opening the file
with notepad ConsoleDown.bat you will see the default settings - "ConsoleDown_v1.3.3.11.exe-f. \
Rom.bin-c 3-i 1512-b 115200 \ n pause".
You need to change the
"-c 3" which is the number
of COM ports in your system. Set the desired number of the COM port. The default is No. 3.
6. After confirming
the settings, save the file. Then run the modified file ConsoleDown.bat.
When properly
configured, the window will look like this:
7. Turn on the
receiver. Screen should look like this:
9. If, within 10
seconds, nothing changes then restart your receiver.
10. If a successful
connection will transfer the data and write flash memory in the receiver. With
a successful recording, the program will display the following:
11. Restart the
receiver after the successful completion of the procedure of firmware.
12. When an error occurs, press ctrl + c to
stop the program and restart the procedure.
